本文實例為大家分享了wxPython色環電阻計算器的具體代碼，供大家參考，具體內容如下

import wx  # 導入wxPythonclass MyFrame(wx.Frame):  def __init__(self,parent,id):    wx.Frame.__init__(self, parent, id, "色環電阻計算器2.0",size=(600,450))    self.panel = wx.Panel(self) # 創建畫板(設置程序標題，大小)    self.font1 = wx.Font(20,wx.DEFAULT,wx.FONTSTYLE_NORMAL,wx.NORMAL,faceName="黑體")    self.font2 = wx.Font(16,wx.DEFAULT,wx.FONTSTYLE_NORMAL,wx.NORMAL,faceName="黑體")    self.choices = ['黑', '棕', '紅', '橙', '黃', '綠', '藍', '紫', '灰', '白', '金', '銀']    self.choices2 = ['黑', '棕', '紅', '綠', '藍', '紫', '灰', '金', '銀']    self.choices3 = ['black','brown','red','coral','yellow','green','blue','purple','grey','white','gold','light grey']    self.choices4 = ['black','brown','red','green','blue','purple','grey','gold','light grey']    self.error_code = ['20', '1', '2', '0.5', '0.25', '0.1', '0.05', '5', '10']    self.IsFive = True    self.Init_Panel()  def Init_Panel(self):    self.Create_display_part()    self.Create_resistant()    self.bt_change = wx.Button(self.panel, label='切換為4色環', pos=(400, 250), size=(150, 50))    self.bt_change.SetFont(self.font2)    self.bt_change.Bind(wx.EVT_BUTTON, self.Event_Change)    self.Create_display5()  def Event_Change(self,event):    self.radiobox1.Destroy()    self.radiobox2.Destroy()    self.radiobox3.Destroy()    self.radiobox4.Destroy()    self.colour_1.Destroy()    self.colour_2.Destroy()    self.colour_3.Destroy()    self.colour_4.Destroy()    if self.IsFive == True:      self.bt_change.SetLabel('切換為5色環')      self.radiobox5.Destroy()      self.colour_5.Destroy()      self.Create_display4()      self.IsFive = False    else:      self.bt_change.SetLabel('切換為4色環')      self.Create_display5()      self.IsFive = True  def Event_radiobox(self,event):    self.colour_1.Destroy()    self.colour_2.Destroy()    self.colour_3.Destroy()    self.colour_4.Destroy()    one = self.radiobox1.GetSelection()    two = self.radiobox2.GetSelection()    three = self.radiobox3.GetSelection()    four = self.radiobox4.GetSelection()    if self.IsFive == True:      self.colour_5.Destroy()      five = self.radiobox5.GetSelection()      if four > 9:        temp = 9 - four      else:        temp = four      result = (one * 100 + two * 10 + three) * (pow(10, temp))      error = self.error_code[five]      self.display(result, error)      self.colour_1 = self.Create_Colourbar(200, self.choices3[one])      self.colour_2 = self.Create_Colourbar(240, self.choices3[two])      self.colour_3 = self.Create_Colourbar(280, self.choices3[three])      self.colour_4 = self.Create_Colourbar(320, self.choices3[four])      self.colour_5 = self.Create_Colourbar(360, self.choices4[five])    else:      if three > 8:        temp = 8 - three      else:        temp = three + 1      result = (one * 10 + two) * (pow(10, temp))      error = self.error_code[four]      self.display(result, error)      self.colour_1 = self.Create_Colourbar(200, self.choices3[one])      self.colour_2 = self.Create_Colourbar(250, self.choices3[two])      self.colour_3 = self.Create_Colourbar(300, self.choices3[three + 1])      self.colour_4 = self.Create_Colourbar(350, self.choices4[four])  def Create_display_part(self):    label_resistance = wx.StaticText(self.panel, label="阻值：",pos=(400,25))    label_error = wx.StaticText(self.panel, label="誤差：±",pos=(400,125))    label_percentage = wx.StaticText(self.panel, label="%",pos=(520,150))    self.label_ohm = wx.StaticText(self.panel, label="Ω", pos=(520, 50))    self.text_resistance = wx.TextCtrl(self.panel, value='0.00',pos=(400, 50), style=wx.TE_RIGHT | wx.TE_READONLY)    self.text_error = wx.TextCtrl(self.panel, value='20',pos=(400, 150), style=wx.TE_RIGHT | wx.TE_READONLY)    label_resistance.SetFont(self.font2)    label_error.SetFont(self.font2)    label_percentage.SetFont(self.font2)    self.label_ohm.SetFont(self.font2)    self.text_resistance.SetFont(self.font2)    self.text_error.SetFont(self.font2)    self.text_resistance.SetBackgroundColour('white')    self.text_error.SetBackgroundColour('white')  def Create_resistant(self):    body = wx.StaticText(self.panel, pos=(170, 330), size=(240, 50))    body.SetBackgroundColour('light blue')    left_pin = wx.StaticText(self.panel, pos=(20, 350), size=(150, 5))    left_pin.SetBackgroundColour('white')    right_pin = wx.StaticText(self.panel, pos=(410, 350), size=(150, 5))    right_pin.SetBackgroundColour('white')  def Create_display4(self):    self.radiobox1 = self.Create_radiobox('1',0,self.choices[:-2])    self.radiobox2 = self.Create_radiobox('2',100, self.choices[:-2])    self.radiobox3 = self.Create_radiobox('3',200, self.choices[1:])    self.radiobox4 = self.Create_radiobox('4',300, self.choices2)    self.colour_1 = self.Create_Colourbar(200,'black')    self.colour_2 = self.Create_Colourbar(250,'black')    self.colour_3 = self.Create_Colourbar(300,'brown')    self.colour_4 = self.Create_Colourbar(350,'black')  def Create_display5(self):    self.radiobox1 = self.Create_radiobox('1', 0, self.choices[:-2])    self.radiobox2 = self.Create_radiobox('2', 75, self.choices[:-2])    self.radiobox3 = self.Create_radiobox('3', 150, self.choices[:-2])    self.radiobox4 = self.Create_radiobox('4', 225, self.choices)    self.radiobox5 = self.Create_radiobox('5', 300, self.choices2)    self.colour_1 = self.Create_Colourbar(200, 'black')    self.colour_2 = self.Create_Colourbar(240, 'black')    self.colour_3 = self.Create_Colourbar(280, 'black')    self.colour_4 = self.Create_Colourbar(320, 'black')    self.colour_5 = self.Create_Colourbar(360, 'black')  def Create_radiobox(self, label_num, abscissa, choices):    label = '第' + label_num + '位'    pos = (abscissa,0)    radiobox = wx.RadioBox(self.panel, -1, label, pos, choices=choices, majorDimension=1)    radiobox.Bind(wx.EVT_RADIOBOX, self.Event_radiobox)    return radiobox  def Create_Colourbar(self,abscissa,colour):    pos = (abscissa,330)    colour_bar = wx.StaticText(self.panel,pos=pos, size=(30, 50))    colour_bar.SetBackgroundColour(colour)    return colour_bar  def display(self,a,b):    if a>=1000000:      a="%.2f"%(a/1000000)      self.label_ohm.SetLabel('MΩ')    elif 1000<=a<=1000000:      a="%.2f"%(a/1000)      self.label_ohm.SetLabel('KΩ')    else:      a="%.2f"%(a)      self.label_ohm.SetLabel('Ω')    self.text_resistance.SetValue(a)    self.text_error.SetValue(b)if __name__ =='__main__':  app = wx.App()  myframe = MyFrame(None,-1)  myframe.Show()  app.MainLoop()