discuz x3如何保留源端口

2024-09-11 09:03:09

字體：大中小

來源：轉載

供稿：網友

接上級要求論壇需要記錄用戶的源端口信息,現將實現該功能的方法貼上來以供參考,先說明一下我測試的環境是Disciz X3.

一、簡單的插件安裝法

進論壇管理后臺依次點擊“應用” 應用中心,在應用中心中搜索日志,本人安裝的是 dzsup用戶登錄日志(該日志僅記錄用戶登錄的信息,上級安裝發貼也要有記錄).

還有一個是“端口日志” 該插件只記錄發貼的IP和端口(上級要求記錄用戶登錄的源端口)所以這兩個都安裝就可以了.

二、有權限的用戶可以修改數據庫、程序、以及模板來自己設置,因為目前這兩個插件還是免費的,但如果收費的話我們就要另想辦法、要不就出錢購買.

步驟如下:

1、修改數據庫

a.增加會員狀態表字段，端口IP端口、最后訪問端口、類型CHAR 長度 6

ALTER TABLE `pre_common_member_status` ADD `regipport` CHAR( 6 ) NOT NULL DEFAULT '0' AFTER `lastip` ,

ADD `lastipport` CHAR( 6 ) NOT NULL DEFAULT '0' AFTER `regipport`

b.增加帖子表字段、發貼時的端口

ALTER TABLE `pre_forum_post` ADD `useport` CHAR( 6 ) NOT NULL DEFAULT '0' AFTER `useip`

2. 修改程序文件

2.1. 修改用戶注冊時的程序文件

source/class/tab/table_common_member.php 292行搜索 'lastip' => (string) $Ip 下面增加兩行:

'regipport' => (int) $_SERVER['REMOTE_PORT'],

'lastipport' => (int) $_SERVER['REMOTE_PORT'],

2.2 source/class/class_member.php 121行

搜索：C::t('common_member_status')->update($_G['uid'], array('lastip' => $_G['clientip'], 'lastvisit' =>TIMESTAMP, 'lastactivity' => TIMESTAMP));

改為:

C::t('common_member_status')->update($_G['uid'], array('lastip' => $_G['clientip'],'lastipport'=>$_SERVER['REMOTE_PORT'], 'lastvisit' =>TIMESTAMP, 'lastactivity' => TIMESTAMP));

2.3 source/class/model/model_forum_post.php 139行在 'status' => $status, 后面增加 'useport' => (int) $_SERVER['REMOTE_PORT'],改后為:

$this->pid = insertpost(array(

            'fid' => $this->forum['fid'],

            'tid' => $this->thread['tid'],

            'first' => '0',

            'author' => $this->member['username'],

            'authorid' => $this->member['uid'],

            'subject' => $this->param['subject'],

            'dateline' => $this->param['timestamp'] ? $this->param['timestamp'] : getglobal('timestamp'),

            'message' => $this->param['message'],

            'useip' => $this->param['clientip'] ? $this->param['clientip'] : getglobal('clientip'),

            'invisible' => $pinvisible,

            'anonymous' => $this->param['isanonymous'],

            'usesig' => $usesig,

            'htmlon' => $htmlon,

            'bbcodeoff' => $bbcodeoff,

            'smileyoff' => $smileyoff,

            'parseurloff' => $parseurloff,

            'attachment' => '0',

            'status' => $status,

            'useport' =>  (int) $_SERVER['REMOTE_PORT'], //Dusion 2013/6/25增加

        ));

2.4 source/class/model/model_forum_thread.php 同2.3 202行,代碼如下:

$this->pid = insertpost(array(

            'fid' => $this->forum['fid'],

            'tid' => $this->tid,

            'first' => '1',

            'author' => $this->member['username'],

            'authorid' => $this->member['uid'],

            'subject' => $this->param['subject'],

            'dateline' => $this->param['publishdate'],

            'message' => $this->param['message'],

            'useip' => $this->param['clientip'] ? $this->param['clientip'] : getglobal('clientip'),

            'invisible' => $this->param['pinvisible'],

            'anonymous' => $this->param['isanonymous'],

            'usesig' => $this->param['usesig'],

            'htmlon' => $this->param['htmlon'],

            'bbcodeoff' => $this->param['bbcodeoff'],

            'smileyoff' => $this->param['smileyoff'],

            'parseurloff' => $this->param['parseurloff'],

            'attachment' => '0',

            'tags' => $this->param['tagstr'],

            'replycredit' => 0,

            'status' => $this->param['pstatus'],

            'useport' =>  (int) $_SERVER['REMOTE_PORT'], //Dusion 2013/6/25增加  //Vevb.com

        ));

到此,程序部分就改完了,暫時還看不到效果.

3 修改模板文件

3.1 template/default/home/space_profile_body.htm 154 行:

</em>$space[regip] 后面增加：$space[regipport]

</em>$space[lastip] 后面增加：$space[lastipport]