有些嵌入式設備是不需要lcd的，比如路由器。但是，還有些設備是需要lcd顯示內容的，比如游戲機、測試儀、智能手表等等。所以，今天我們就看看lcd驅動在linux/201563.html">linux上是怎么進行的。
1、代碼目錄
drivers/video
2、查看video下的Makefile文件
# SPDX-License-Identifier: GPL-2.0obj-$(CONFIG_VGASTATE) += vgastate.oobj-$(CONFIG_HDMI) += hdmi.oobj-$(CONFIG_VT) += console/obj-$(CONFIG_FB_STI) += console/obj-$(CONFIG_LOGO) += logo/obj-y += backlight/obj-y += fbdev/obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.oifeq ($(CONFIG_OF),y)obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.oendif
3、fbdev默認是被編譯的，一般情況下我們只需要看這個目錄就行了
config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" depends on FB && ARCH_S3C24XX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the built-in LCD controller in the Samsung S3C2410 processor. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called s3c2410fb. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt>. If unsure, say N.config FB_S3C2410_DEBUG bool "S3C2410 lcd debug messages" depends on FB_S3C2410 help Turn on debugging messages. Note that you can set/unset at run time through sysfs
4、以s3c2410為例，分析得出其lcd主要依賴的macro是FB_S3C2410,
obj-y += core/obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
5、除了core是默認編譯的，我們只需要查看s3c2410fb.c這個文件
static struct platform_driver s3c2410fb_driver = { .probe = s3c2410fb_probe, .remove = s3c2410fb_remove, .suspend = s3c2410fb_suspend, .resume = s3c2410fb_resume, .driver = { .name = "s3c2410-lcd", },};static struct platform_driver s3c2412fb_driver = { .probe = s3c2412fb_probe, .remove = s3c2410fb_remove, .suspend = s3c2410fb_suspend, .resume = s3c2410fb_resume, .driver = { .name = "s3c2412-lcd", },};int __init s3c2410fb_init(void){ int ret = platform_driver_register(&s3c2410fb_driver); if (ret == 0) ret = platform_driver_register(&s3c2412fb_driver); return ret;}6、不出意外，這又是一個platform設備，接著看看其probe函數做了什么
ret = register_framebuffer(fbinfo); if (ret < 0) { dev_err(&pdev->dev, "Failed to register framebuffer device: %d/n", ret); goto free_cpufreq; }7、整個代碼，最重要的就是這個register動作，當然還要閱讀一下是否存在其他的函數接口
static struct fb_ops s3c2410fb_ops = { .owner = THIS_MODULE, .fb_check_var = s3c2410fb_check_var, .fb_set_par = s3c2410fb_set_par, .fb_blank = s3c2410fb_blank, .fb_setcolreg = s3c2410fb_setcolreg, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit,};8、最后還是老規矩，看看有沒有中斷需要處理的
ret = request_irq(irq, s3c2410fb_irq, 0, pdev->name, info);
9、后面的話
很多同學把驅動想的很復雜，其實都是一些格式代碼。掌握了基本結構，加上芯片手冊、硬件協議，一般的驅動都可以在很短的時間內學會，這個不存在問題。尤其是那些在市場上出現了很多年的soc，基本不需要改動就可以直接使用。當然，如果真的發現問題了，我們也要有debug的能力。drivers目錄里面的內容很多，但是需要了解和關心的其實不多，努力去做、去解決問題就可以了。
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持VEVB武林網。
新聞熱點
疑難解答
