| 以下為引用的內容： '
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' 一些容易取得的全局變量
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Dim TabStop
Dim NewLine Const TestDrive = "C"
Const TestFilePath = "C:Test" ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' 由 Drive.DriveType 返回的常數
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Const DriveTypeRemovable = 1
Const DriveTypeFixed = 2
Const DriveTypeNetwork = 3
Const DriveTypeCDROM = 4
Const DriveTypeRAMDisk = 5 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' 由 File.Attributes 返回的常數
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Const FileAttrNormal = 0
Const FileAttrReadOnly = 1
Const FileAttrHidden = 2
Const FileAttrSystem = 4
Const FileAttrVolume = 8
Const FileAttrDirectory = 16
Const FileAttrArchive = 32
Const FileAttrAlias = 64
Const FileAttrCompressed = 128 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' 用來打開文件的常數
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Const OpenFileForReading = 1
Const OpenFileForWriting = 2
Const OpenFileForAppending = 8 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' ShowDriveType
'
' 目的：
'
' 生成一個字符串，來描述給定 Drive 對象的驅動器類型。
'
' 示范下面的內容
'
' - Drive.DriveType
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Function ShowDriveType(Drive) Dim S
Select Case Drive.DriveType
Case DriveTypeRemovable
S = "Removable"
Case DriveTypeFixed
S = "Fixed"
Case DriveTypeNetwork
S = "Network"
Case DriveTypeCDROM
S = "CD-ROM"
Case DriveTypeRAMDisk
S = "RAM Disk"
Case Else
S = "Unknown"
End Select ShowDriveType = S End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' ShowFileAttr
'
' 目的：
'
' 生成一個字符串，來描述文件或文件夾的屬性。
'
' 示范下面的內容
'
' - File.Attributes
' - Folder.Attributes
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Function ShowFileAttr(File) ' File 可以是文件或文件夾 Dim S
Dim Attr
Attr = File.Attributes If Attr = 0 Then
ShowFileAttr = "Normal"
Exit Function
End If If Attr And FileAttrDirectory Then S = S & "Directory "
If Attr And FileAttrReadOnly Then S = S & "Read-Only "
If Attr And FileAttrHidden Then S = S & "Hidden "
If Attr And FileAttrSystem Then S = S & "System "
If Attr And FileAttrVolume Then S = S & "Volume "
If Attr And FileAttrArchive Then S = S & "Archive "
If Attr And FileAttrAlias Then S = S & "Alias "
If Attr And FileAttrCompressed Then S = S & "Compressed " ShowFileAttr = S End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' GenerateDriveInformation
'
' 目的：
'
' 生成一個字符串，來描述可用驅動器的當前狀態。
'
' 示范下面的內容
'
' - FileSystemObject.Drives
' - Iterating the Drives collection
' - Drives.Count
' - Drive.AvailableSpace
' - Drive.DriveLetter
' - Drive.DriveType
' - Drive.FileSystem
' - Drive.FreeSpace
' - Drive.IsReady
' - Drive.Path
' - Drive.SerialNumber
' - Drive.ShareName
' - Drive.TotalSize
' - Drive.VolumeName
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Function GenerateDriveInformation(FSO) Dim Drives
Dim Drive
Dim S Set Drives = FSO.Drives S = "Number of drives:" & TabStop & Drives.Count & NewLine & NewLine ' 構造報告的第一行。
S = S & String(2, TabStop) & "Drive"
S = S & String(3, TabStop) & "File"
S = S & TabStop & "Total"
S = S & TabStop & "Free"
S = S & TabStop & "Available"
S = S & TabStop & "Serial" & NewLine ' 構造報告的第二行。
S = S & "Letter"
S = S & TabStop & "Path"
S = S & TabStop & "Type"
S = S & TabStop & "Ready?"
S = S & TabStop & "Name"
S = S & TabStop & "System"
S = S & TabStop & "Space"
S = S & TabStop & "Space"
S = S & TabStop & "Space"
S = S & TabStop & "Number" & NewLine ' 分隔行。
S = S & String(105, "-") & NewLine For Each Drive In Drives S = S & Drive.DriveLetter
S = S & TabStop & Drive.Path
S = S & TabStop & ShowDriveType(Drive)
S = S & TabStop & Drive.IsReady If Drive.IsReady Then
If DriveTypeNetwork = Drive.DriveType Then
S = S & TabStop & Drive.ShareName
Else
S = S & TabStop & Drive.VolumeName
End If S = S & TabStop & Drive.FileSystem
S = S & TabStop & Drive.TotalSize
S = S & TabStop & Drive.FreeSpace
S = S & TabStop & Drive.AvailableSpace
S = S & TabStop & Hex(Drive.SerialNumber) End If S = S & NewLine Next
GenerateDriveInformation = S End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' GenerateFileInformation
'
' 目的：
'
' 生成一個字符串，來描述文件的當前狀態。
'
' 示范下面的內容
'
' - File.Path
' - File.Name
' - File.Type
' - File.DateCreated
' - File.DateLastAccessed
' - File.DateLastModified
' - File.Size
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Function GenerateFileInformation(File) Dim S S = NewLine & "Path:" & TabStop & File.Path
S = S & NewLine & "Name:" & TabStop & File.Name
S = S & NewLine & "Type:" & TabStop & File.Type
S = S & NewLine & "Attribs:" & TabStop & ShowFileAttr(File)
S = S & NewLine & "Created:" & TabStop & File.DateCreated
S = S & NewLine & "Accessed:" & TabStop & File.DateLastAccessed
S = S & NewLine & "Modified:" & TabStop & File.DateLastModified
S = S & NewLine & "Size" & TabStop & File.Size & NewLine GenerateFileInformation = S End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' GenerateFolderInformation
'
' 目的：
'
' 生成一個字符串，來描述文件夾的當前狀態。
'
' 示范下面的內容
'
' - Folder.Path
' - Folder.Name
' - Folder.DateCreated
' - Folder.DateLastAccessed
' - Folder.DateLastModified
' - Folder.Size
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Function GenerateFolderInformation(Folder) Dim S S = "Path:" & TabStop & Folder.Path
S = S & NewLine & "Name:" & TabStop & Folder.Name
S = S & NewLine & "Attribs:" & TabStop & ShowFileAttr(Folder)
S = S & NewLine & "Created:" & TabStop & Folder.DateCreated
S = S & NewLine & "Accessed:" & TabStop & Folder.DateLastAccessed
S = S & NewLine & "Modified:" & TabStop & Folder.DateLastModified
S = S & NewLine & "Size:" & TabStop & Folder.Size & NewLine GenerateFolderInformation = S End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' GenerateAllFolderInformation
'
' 目的：
'
' 生成一個字符串，來描述一個文件夾和所有文件及子文件夾的當前狀態。
'
' 示范下面的內容
'
' - Folder.Path
' - Folder.SubFolders
' - Folders.Count
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Function GenerateAllFolderInformation(Folder) Dim S
Dim SubFolders
Dim SubFolder
Dim Files
Dim File S = "Folder:" & TabStop & Folder.Path & NewLine & NewLine Set Files = Folder.Files If 1 = Files.Count Then
S = S & "There is 1 file" & NewLine
Else
S = S & "There are " & Files.Count & " files" & NewLine
End If If Files.Count <> 0 Then For Each File In Files
S = S & GenerateFileInformation(File)
Next End If Set SubFolders = Folder.SubFolders If 1 = SubFolders.Count Then
S = S & NewLine & "There is 1 sub folder" & NewLine & NewLine
Else
S = S & NewLine & "There are " & SubFolders.Count & " sub folders" & NewLine & NewLine
End If If SubFolders.Count <> 0 Then For Each SubFolder In SubFolders
S = S & GenerateFolderInformation(SubFolder)
Next S = S & NewLine For Each SubFolder In SubFolders
S = S & GenerateAllFolderInformation(SubFolder)
Next End If GenerateAllFolderInformation = S End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' GenerateTestInformation
'
' 目的：
'
' 生成一個字符串，來描述 C:Test 文件夾和所有文件及子文件夾的當前狀態。
'
' 示范下面的內容
'
' - FileSystemObject.DriveExists
' - FileSystemObject.FolderExists
' - FileSystemObject.GetFolder
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Function GenerateTestInformation(FSO) Dim TestFolder
Dim S If Not FSO.DriveExists(TestDrive) Then Exit Function
If Not FSO.FolderExists(TestFilePath) Then Exit Function Set TestFolder = FSO.GetFolder(TestFilePath) GenerateTestInformation = GenerateAllFolderInformation(TestFolder) End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' DeleteTestDirectory
'
' 目的：
'
' 清理 test 目錄。
'
' 示范下面的內容
'
' - FileSystemObject.GetFolder
' - FileSystemObject.DeleteFile
' - FileSystemObject.DeleteFolder
' - Folder.Delete
' - File.Delete
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Sub DeleteTestDirectory(FSO) Dim TestFolder
Dim SubFolder
Dim File
<a name="DeleteFile">
' 有兩種方法可用來刪除文件： FSO.DeleteFile(TestFilePath & "BeatlesOctopusGarden.txt") Set File = FSO.GetFile(TestFilePath & "BeatlesBathroomWindow.txt")
File.Delete
' 有兩種方法可用來刪除文件夾：
FSO.DeleteFolder(TestFilePath & "Beatles") FSO.DeleteFile(TestFilePath & "ReadMe.txt") Set TestFolder = FSO.GetFolder(TestFilePath)
TestFolder.Delete End Sub ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' CreateLyrics
'
' 目的：
'
' 在文件夾中創建兩個文本文件。
'
'
' 示范下面的內容
'
' - FileSystemObject.CreateTextFile
' - TextStream.WriteLine
' - TextStream.Write
' - TextStream.WriteBlankLines
' - TextStream.Close
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Sub CreateLyrics(Folder) Dim TextStream
</a><a name="CreateTextFile">
Set TextStream = Folder.CreateTextFile("OctopusGarden.txt")
</a><a name="WriteToFile">
TextStream.Write("Octopus' Garden ") ' 請注意，該語句不添加換行到文件中。
TextStream.WriteLine("(by Ringo Starr)")
TextStream.WriteBlankLines(1)
TextStream.WriteLine("I'd like to be under the sea in an octopus' garden in the shade,")
TextStream.WriteLine("He'd let us in, knows where we've been -- in his octopus' garden in the shade.")
TextStream.WriteBlankLines(2)
</a><a name="Close">
TextStream.Close Set TextStream = Folder.CreateTextFile("BathroomWindow.txt")
TextStream.WriteLine("She Came In Through The Bathroom Window (by Lennon/McCartney)")
TextStream.WriteLine("")
TextStream.WriteLine("She came in through the bathroom window protected by a silver spoon")
TextStream.WriteLine("But now she sucks her thumb and wanders by the banks of her own lagoon")
TextStream.WriteBlankLines(2)
TextStream.Close End Sub ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' GetLyrics
'
' 目的：
'
' 顯示 lyrics 文件的內容。
'
'
' 示范下面的內容
'
' - FileSystemObject.OpenTextFile
' - FileSystemObject.GetFile
' - TextStream.ReadAll
' - TextStream.Close
' - File.OpenAsTextStream
' - TextStream.AtEndOfStream
' - TextStream.ReadLine
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Function GetLyrics(FSO) Dim TextStream
Dim S
Dim File ' 有多種方法可用來打開一個文本文件，和多種方法來從文件讀取數據。
' 這兒用了兩種方法來打開文件和讀取文件： Set TextStream = FSO.OpenTextFile(TestFilePath & "BeatlesOctopusGarden.txt", OpenFileForReading)
</a><a name="ReadFromFile">
S = TextStream.ReadAll & NewLine & NewLine
TextStream.Close Set File = FSO.GetFile(TestFilePath & "BeatlesBathroomWindow.txt")
Set TextStream = File.OpenAsTextStream(OpenFileForReading)
Do While Not TextStream.AtEndOfStream
S = S & TextStream.ReadLine & NewLine
Loop
TextStream.Close GetLyrics = S
End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' BuildTestDirectory
'
' 目的：
'
' 創建一個目錄分層結構來示范 FileSystemObject。
'
' 以這樣的次序來創建分層結構：
'
' C:Test
' C:TestReadMe.txt
' C:TestBeatles
' C:TestBeatlesOctopusGarden.txt
' C:TestBeatlesBathroomWindow.txt
'
'
' 示范下面的內容
'
' - FileSystemObject.DriveExists
' - FileSystemObject.FolderExists
' - FileSystemObject.CreateFolder
' - FileSystemObject.CreateTextFile
' - Folders.Add
' - Folder.CreateTextFile
' - TextStream.WriteLine
' - TextStream.Close
'
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
</a><a name="FolderInfo">
Function BuildTestDirectory(FSO)
Dim TestFolder
Dim SubFolders
Dim SubFolder
Dim TextStream ' 排除(a)驅動器不存在，或(b)要創建的目錄已經存在的情況。 If Not FSO.DriveExists(TestDrive) Then
BuildTestDirectory = False
Exit Function
End If If FSO.FolderExists(TestFilePath) Then
BuildTestDirectory = False
Exit Function
End If Set TestFolder = FSO.CreateFolder(TestFilePath) Set TextStream = FSO.CreateTextFile(TestFilePath & "ReadMe.txt")
TextStream.WriteLine("My song lyrics collection")
TextStream.Close Set SubFolders = TestFolder.SubFolders Set SubFolder = SubFolders.Add("Beatles") CreateLyrics SubFolder BuildTestDirectory = True End Function ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'
' 主程序
'
' 首先，它創建一個 test 目錄，以及一些子文件夾和文件。
' 然后，它轉儲有關可用磁盤驅動器和 test 目錄的某些信息，
' 最后，清除 test 目錄及其所有內容。
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Main Dim FSO ' 設立全局變量。
TabStop = Chr(9)
NewLine = Chr(10)
</a><a name="CreateFSO">
Set FSO = CreateObject("Scripting.FileSystemObject") If Not BuildTestDirectory(FSO) Then
Print "Test directory already exists or cannot be created. Cannot continue."
Exit Sub
End If
Print GenerateDriveInformation(FSO) & NewLine & NewLine Print GenerateTestInformation(FSO) & NewLine & NewLine Print GetLyrics(FSO) & NewLine & NewLine DeleteTestDirectory(FSO)
End Sub | 
