這里要填寫程序的名字，如“My App”，用用版本“1.00”，應用程序的發布者“ My Company”，及應用程序的網站“XXXXX”，后兩者可以不寫。點擊下一步出現如下界面
這里首先要選擇應用程序的這性文件，也就是XXXX.exe文件，點擊右側的瀏覽找到你的執行文件即可。下邊的“允許用戶在安裝完成后啟動應用程序”，勾選前面的對勾，即可，若禁止安裝完成后就運行程序，可不選擇此項。下邊的“其他應用程序文件”比較重要，一般包含程序用到的一些DLL文件，配置文件（.ini文件），特殊的AxtiveX（.ocx）控件及Readme文件等，點擊下一步，出現如下界面
; 腳本由 Inno Setup 腳本向導 生成！
; 有關創建 Inno Setup 腳本文件的詳細資料請查閱幫助文檔！</p><p>#define MyAppName "3G NVS Viewer"
#define MyAppVersion "1.00"
#define MyAppExeName "LAUMp4Test.exe"</p><p>[Setup]
; 注: AppId的值為單獨標識該應用程序。
; 不要為其他安裝程序使用相同的AppId值。
; (生成新的GUID，點擊 工具|在IDE中生成GUID。)
AppId={{140AF0C5-52A5-4ECD-AF8B-0037036B0549}
AppName={#MyAppName}
AppVersion={#MyAppVersion}
;AppVerName={#MyAppName} {#MyAppVersion}
DefaultDirName={pf}/{#MyAppName}
DefaultGroupName={#MyAppName}
InfoAfterFile=E:/MyProject/3G/modify/08060900/Client/bin/Readme.txt
OutputDir=E:/MyProject/3G/setup/Output
OutputBaseFilename=3G NVS Viewer setup_V1.00
Compression=lzma
SolidCompression=yes</p><p>[Languages]
Name: "chinesesimp"; MessagesFile: "compiler:Default.isl"</p><p>[Tasks]
Name: "desktopicon"; Description: "{cm:CreateDesktopIcon}"; GroupDescription: "{cm:AdditionalIcons}"; Flags: unchecked; OnlyBelowVersion: 0,6.1</p><p>[Files]
Source: "E:/MyProject/3G/modify/08060900/Client/bin/LAUMp4Test.exe"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/config.ini"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/en_resource.dll"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/hi_h264dec_w.dll"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/lang.ini"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/LUSerParamX.ocx"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/LUSerParamXEn.dll"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/NetClient.dll"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/NetHostSDK.dll"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/Readme.txt"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/RegOCX.bat"; DestDir: "{app}"; Flags: ignoreversion
Source: "E:/MyProject/3G/modify/08060900/Client/bin/LUSerParamX.ocx";DestDir: {app}; Flags: regserver</p><p>;最后一句在安裝程序時自動注冊LUSerParamX.ocx控件
; 注意: 不要在任何共享系統文件上使用“Flags: ignoreversion”</p><p>[Icons]
Name: "{group}/{#MyAppName}"; Filename: "{app}/{#MyAppExeName}";WorkingDir: "{app}" ;
Name: "{group}/{cm:UninstallProgram,{#MyAppName}}"; Filename: "{uninstallexe}";WorkingDir: "{app}" ;
Name: "{commondesktop}/{#MyAppName}"; Filename: "{app}/{#MyAppExeName}"; Tasks: desktopicon ;WorkingDir: "{app}" ;</p><p>;紅色部分的代碼實現在安裝目錄下讀取.ini文件</p><p>[Run]
Filename: "{app}/{#MyAppExeName}"; Description: "{cm:LaunchProgram,{#StringChange(MyAppName, "&", "&&")}}"; Flags: nowait postinstall skipifsilent
