使用腳本自動修改ip設置

vbs腳本的功能非常強大，管理系統簡單方便！下面的腳本win2000和winxp都可以使用，win2003沒有測試過，應該也沒有問題。如果需要經常切換網關，或是ip，這個腳本是最方便的了。稍微修改一下甚至可以做到1分鐘變一次ip。

復制代碼代碼如下:

@Echo Off
TITLE VEVB武林網ip設置器

:start
CLS
COLOR 2f
:: 使用COLOR命令對控制臺輸出顏色進行更改
mode con cols=56 lines=20
:: MODE語句為設定窗體的寬和高
:sc_main
echo       -------------------------------------------
echo.&echo.
echo             0.192.168.0.99 & echo.
echo             1.192.168.1.99 & echo.
echo             q.退出 & echo.&echo.&echo.&echo.&echo.&echo.

set "select="
set/p select= 輸入數字，按回車繼續 :
if "%select%"=="0" (goto sc_ip0)
if "%select%"=="1" (goto sc_ip1)
if "%select%"=="Q" (goto sc_exit)

:sc_exit
exit
goto :eof

:sc_ip0
cls
echo 正在設置中，請稍候
Netsh interface IP Set Address "本地連接" Static 192.168.0.99 255.255.255.0 192.168.0.1 1
Netsh interface IP set dns "本地連接" static 192.168.0.1 primary
echo 設置成功 192.168.0.99
PAUSE >nul
Goto sc_main
:sc_ip1
cls
echo 正在設置中，請稍候
Netsh interface IP Set Address "本地連接" Static 192.168.1.99 255.255.255.0 192.168.1.1 1
Netsh interface IP set dns "本地連接" static 192.168.1.1 primary
echo 設置成功 192.168.1.99
PAUSE >nul
Goto sc_main

vbs修改ip

復制代碼代碼如下:

changeip.vbsstrComputer = "."
Set objWMIService = GetObject("winmgmts://" & strComputer & "/root/cimv2")
Set colNetAdapters = objWMIService.ExecQuery _
("Select * from Win32_NetworkAdapterConfiguration where IPEnabled=TRUE")

For Each objNetAdapter in colNetAdapters
sip=objNetAdapter.IPAddress
strIPAddress = sip '保持原來的ip，如果需要修改ip為192.168.0.200：strIPAddress = Array("192.168.0.200")
strSubnetMask = Array("255.255.255.0")
strGateway = Array("192.168.0.254") '修改網關為192.168.0.254
strGatewayMetric = Array(1)

    errEnable = objNetAdapter.EnableStatic(strIPAddress, strSubnetMask)
    errGateways = objNetAdapter.SetGateways(strGateway, strGatewaymetric)
    If errEnable = 0 Then
        WScript.Echo "The IP address has been changed."
    Else
        WScript.Echo "The IP address could not be changed."
    End If
    exit for      '只修改第一個網卡的設置
Next

VBS修改IP

復制代碼代碼如下:

'VBS修改IP
function transh(s)
if isnumeric(s) then
if len(s)=1 then
   transh="00" & s
elseif len(s)=2 then
   transh="0" & s
elseif len(s)=3 then
   transh=s
end if
else
   transh=""
end if
end function
dim head
'機器名頭
head="B"
'ip頭
iphead="192.168.131"
ipgate="192.168.131"

dim i
i=inputbox("輸入機器序號(2-254)")
if i="" then
msgbox "Error: 序號不正確！"
else
dim shell
set shell = CreateObject("WScript.Shell")

'修改計算機名
shell.RegWrite "HKLM/SYSTEM/CurrentControlSet/Control/ComputerName/ComputerName/ComputerName", head & transh(i) ,"REG_SZ"
shell.RegWrite "HKLM/SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/NV Hostname", head & transh(i) ,"REG_SZ"
shell.RegWrite "HKLM/SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/Hostname", head & transh(i) ,"REG_SZ"
'修改IP
shell.run "netsh interface ip set address 本地連接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
shell.run "netsh interface ip set address 本地連接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
shell.run "netsh interface ip set address 本地連接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
end if