//    glob_t mtdbuf;
    struct mtd_info_user mtd;
    struct erase_info_user erase;
    int blocks = 0;
    int i = 0;  //用于控制擦除的塊的個數
    int k = 0;
    int written = 0;  //已寫入的字節數，只初始化一次
    unsigned int size = StateOfImage.st_size;  //應該是鏡像的實際大小，因為內存中大于鏡像的空間的內容不可預知
    unsigned int result = 0;
    unsigned int DevNum = 0;    //設備的數量
    unsigned int StartDev = 0;  //從第startDev開始擦除
    char DevName[20] = {0};
    unsigned int AllSize = 0;
    #define MAXPARTITIONS 40
    struct DeviceInfo
    {
        int fd;
        char dir[20];
        uint32_t size;     // Total size of the MTD
        uint32_t erasesize;

    }DevInfo[MAXPARTITIONS];//用來存儲設備信息

    bzero(DevInfo, sizeof(struct DeviceInfo));

/* 這是一種方法，但是有一個缺點，當mtd設備大于10個是，通過glob搜索出來的結果
   會出問題，下面采用會采用第二種方法 */
//    if(searchmtd(&mtdbuf) != 0){

//        DEBUG("Sorry! Can not find mtd device/n");
//        return 1;   //返回大于零的數，表示升級失敗
//    }
//    else
//    {
//        int fd;
//       
//        DEBUG("find %d mtd devices /n",mtdbuf.gl_pathc);
//        DevNum = mtdbuf.gl_pathc;

//        for(i=0; i<DevNum; i++)
//        {
//            fd = safeOpen (mtdbuf.gl_pathv[i],O_SYNC | O_RDWR);
//            if(fd < 0)
//            {
//                printf("failt to open/n");
//                return 1;
//            }
//            bzero(&mtd, sizeof(struct mtd_info_user));
//            if (ioctl(fd, MEMGETINFO,&mtd) < 0)
//            {
//                DEBUG("ioctl(): %m/n");
//                DEBUG("This doesn't seem to be a valid MTD flash device!/n");
//                return 1;
//            }
//           
//            strcpy(DevInfo[i].dir, mtdbuf.gl_pathv[i]);
//            DevInfo[i].fd = fd;
//            DevInfo[i].size = mtd.size;
//            DevInfo[i].erasesize = mtd.erasesize;
//        }

//        globfree(&mtdbuf);
//        for(i=0; i<DevNum; i++)
//        {
//            printf("/n/tinfo of %s/n",DevInfo[i].dir);
//            printf("%s.fd:            %d/n",DevInfo[i].dir, DevInfo[i].fd);
//            printf("%s.size:          %d/n",DevInfo[i].dir,DevInfo[i].size);
//            printf("%s.erasesize:     %d/n",DevInfo[i].dir,DevInfo[i].erasesize);
//        }
//    }

/* 下面是第二種方法，這種方法克服了第一種方法的缺陷，不受mtd設備數量的限制 */

    for(i=0; i<MAXPARTITIONS; i++)
    {
        int fd;
        sprintf(DevName, "%s%d", "/dev/mtd",i);

        if((fd = open (DevName,O_SYNC | O_RDWR)) > 0)
        {
            bzero(&mtd, sizeof(struct mtd_info_user));
            if (ioctl(fd, MEMGETINFO,&mtd) < 0)
            {
                DEBUG("ioctl(): %m/n");
                DEBUG("This doesn't seem to be a valid MTD flash device!/n");
                return 1;
            }
            strcpy(DevInfo[i].dir, DevName);
            DevInfo[i].fd = fd;
            DevInfo[i].size = mtd.size;
            DevInfo[i].erasesize = mtd.erasesize;
        }
        else
        {
            DevNum = i;
            break;
        }

    }

    for(i=0; i<DevNum; i++)
    {
        printf("/n/tinfo of %s/n",DevInfo[i].dir);
        printf("%s.fd:            %d/n",DevInfo[i].dir, DevInfo[i].fd);
        printf("%s.size:          %d/n",DevInfo[i].dir,DevInfo[i].size);
        printf("%s.erasesize:     %d/n",DevInfo[i].dir,DevInfo[i].erasesize);
        AllSize += DevInfo[i].size;
     }

    if(AllSize < StateOfImage.st_size)
    {
        DEBUG("ERROR!! all device size is less than ImageSize/n");
        return 1;
    }

    for(i=StartDev; i<DevNum; i++)
    {

      /**
       * 先進行擦除操作
       */
        int j = 0;
        g_AllImgSize = DevInfo[i].size;
        g_AllImgWrite = 0;
        erase.start = 0;
        blocks = DevInfo[i].size / mtd.erasesize;  //計算要擦除的塊的個數
        erase.length = mtd.erasesize;
        printf ("/nbegin to erase block %s/n", DevInfo[i].dir);
        for (j= 1; j <= blocks; j++)
        {
            fprintf(stderr, "/rErasing blocks: %d/%d (%d%%)", j, blocks, (int)PERCENTAGE (j, blocks));
            g_percentage = 100 * ((float)g_AllImgWrite / g_AllImgSize);
              if (ioctl(DevInfo[i].fd, MEMERASE, &erase) < 0)
              {
                DEBUG("/n");
                DEBUG("While erasing blocks 0x%.8x-0x%.8x on %s/n",/
                (unsigned int) erase.start, (unsigned int) (erase.start + erase.length), DevInfo[i].dir);
                /*return "Error while erasing blocks";*/
                return 1;
            }
            g_AllImgWrite += erase.length;
            erase.start += mtd.erasesize;
        }
        printf("/n/rErased blocks: %d/%d (100%%)/n", blocks, blocks);

        /**
         * 再進行寫操作
         */
        printf ("/nbegin to write block %s/n/n", DevInfo[i].dir);
        g_AllImgWrite = 0;
        k = BUFSIZE;
        while (size)
        {
            if (size < BUFSIZE)
            {
                k = size;
            }
            printf("/033[1A");
            printf("/r%s usage: %dk/%dk (%d%%)/n",/
            DevInfo[i].dir, KB (g_AllImgWrite + k), KB (DevInfo[i].size), (int)PERCENTAGE (g_AllImgWrite + k, DevInfo[i].size));
            fprintf(stderr, "Writing data: %dk/%ldk (%d%%)", KB (written + k), KB (StateOfImage.st_size), (int)PERCENTAGE (written + k, StateOfImage.st_size));
            result = write(DevInfo[i].fd, &upPack[written], k);
            if (k != result)
            {
                DEBUG ("/n");
                if (result < 0)
                {
                    DEBUG("While writing data to 0x%.8x-0x%.8x on %s/n", written, written + k, DevInfo[i].dir);
                      return 1;
                }
                DEBUG("Short write count returned while writing to x%.8x-0x%.8x on %s: %d/%d bytes written to flash/n", /
                        written,written + k, DevInfo[i].dir, written + result, DevInfo[i].size);
                return 1;
            }

            written += k;
            size -= k;

             g_AllImgWrite += k;
            if(g_AllImgWrite >= DevInfo[i].size)
            {  
                g_AllImgWrite = 0;
                printf("/n");
                break;
            }

        }
        printf("Wrote %d / %ldk bytes/n", written, (unsigned long int)(StateOfImage.st_size));       

    }

    munmap(upPack, UPGRADE_SHM_SIZE);
    for(i=0; i<DevNum; i++)
    {
        close (DevInfo[i].fd);
        printf("%s is closed!/n",DevInfo[i].dir);
    }

    return 0;
}