安裝環境：
ubuntu 8.04.1 LTS

安裝步驟：

1.安裝lm-sensors
# apt-get install lm-sensors

2.設定監控選項
# sensors-detect

通常都是回答yes即可，注意最后一項，例如下面的資訊

To load everything that is needed, add this to /etc/modules:

#----cut here----
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
# modprobe unknown adapter NVIDIA i2c adapter
i2c-i801
# Chip drivers
# no driver for Winbond W83L785R/G yet
lm85
#----cut here----

3.出現如上訊息后，載入模組

例如我的是i2c-i801與lm85

# modprobe i2c-i801
# modprobe lm85

4.之后再輸入：
# sensors

5.就會出現cpu溫度之類的監控訊息。

adm1027-i2c-3-2e
Adapter: SMBus I801 adapter at e000
V1.5: +1.31 V (min = +0.00 V, max = +3.32 V)
VCore: +1.49 V (min = +0.00 V, max = +2.99 V)
V3.3: +3.30 V (min = +0.00 V, max = +4.38 V)
V5: +5.08 V (min = +0.00 V, max = +6.64 V)
V12: +11.97 V (min = +0.00 V, max = +15.94 V) ALARM
CPU_Fan: 3941 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 1882 RPM (min = 0 RPM)
CPU Temp: +48.8°C (low = -127.0°C, high = +127.0°C)
Board Temp: +46.0°C (low = -127.0°C, high = +127.0°C)
Remote Temp: +45.5°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +1.525 V