4、地圖格子大?。?/strong>
復制代碼 代碼如下:
gameWorld.tileSize （20，20）
5、整個地圖大?。?br />復制代碼 代碼如下:
gameWorld.mapSize * gameWorld.tileSize;
當然這里所說的是地圖格子是個正方形，非正方形也容易啦。
6、anchor屬性 1） 添加一個精靈，這個精靈是個像素為1*1的紅色圖片，設置坐標為20，20，即在地圖的第一個格子的右上角，設置anchorPoint為（0.5， 0.5）
2） 再添加一個精靈，這個精靈是個像素為20*20的藍色圖片，設置坐標為20，20，即在地圖的第一個格子的右上角，同樣設置anchorPoint為（0.5， 0.5）
運行效果是矩形精靈的中心和在點精靈的位置，即矩形精靈的錨點為第一個格子的右上角（20，20）坐標 處
去掉兩個精靈的anchorPoint屬性
運行效果和上面相同
設置rectSprite的anchorPoint為ccp(0,0)
運行效果是矩形精靈的左下角與點精靈重合。
設置rectSprite的anchorPoint為ccp(1,1)
運行效果是矩形精靈的右上角與點精靈重合。
同理設置ccp(0.5, 1) , ccp(1, 0.5)等
由上面可以得出：
1）anchorPoint屬性默認為ccp(0.5, 0.5)
2）當設置（0，0）時是以左下角為錨點
3）當設置（1， 1）時是以右上角角為錨點
4）由此可以自己推論到底該把錨點設置在哪里
Cocos2D使用的是OpenGL坐標系
OpenGL坐標系：原點在左下角， X軸向右，Y軸向上
IPhone屏幕坐標系：原點在左上角，X軸向右，Y軸向下
很簡單的判斷方法：由于Cocos2D的坐標系的原點在左下角。所以精靈內部坐標原點也是左下角，即當anchorPoint為（0， 0）時即以左下角為錨點，為（1，1）時就以右上角為錨點，當然（0.5， 0.5）就是以精靈中心為錨點了。由此可以推算出-2,-3.... 2, 3.... 等值時精靈錨點坐標。
7、坐標轉換
復制代碼 代碼如下:
-(id) init
{
// always call "super" init
// Apple recommends to re-assign "self" with the "super" return value
if( (self=[super init])) {
CCTMXTiledMap *gameWorld = [CCTMXTiledMap tiledMapWithTMXFile:@"PositionText.tmx"];
[self addChild:gameWorld];
CGSize winSize = [[CCDirector sharedDirector] winSize];
CCLOG(@"gameWorld.mapSize.width:%.2f gameWorld.mapSize.height:%.2f",gameWorld.mapSize.width, gameWorld.mapSize.height);
CCLOG(@"gameWorld.tileSize.width: %.2f gameWorld.tileSize.height:%.2f", gameWorld.tileSize.width, gameWorld.tileSize.height);
CCLOG(@"winSize.width:%.2f winSize.height:%.2f", winSize.width, winSize.height);
CCSprite *pointSprite = [CCSprite spriteWithFile:@"point.png"];
[gameWorld addChild:pointSprite z:2 tag:1];
pointSprite.position = ccp(20,20);
//pointSprite.anchorPoint = ccp(0.5, 0.5);
CCSprite *rectSprite = [CCSprite spriteWithFile:@"myrect.png"];
[gameWorld addChild:rectSprite z:1 tag:1];
rectSprite.position = ccp(40,40);
rectSprite.anchorPoint = ccp(2, 2);
[self setIsTouchEnabled:YES];
}
return self;
}
- (void) registerWithTouchDispatcher {
[[CCTouchDispatcher sharedDispatcher] addTargetedDelegate:self priority:INT_MIN + 1 swallowsTouches:YES];
}
- (BOOL) ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event {
CGPoint point = [touch locationInView: [touch view]];
CCLOG(@"Screen coordX: %.2f coordY: %.2f", point.x, point.y);
point = [[CCDirector sharedDirector] convertToGL: point];
CCLOG(@"OpenGL coordX: %.2f coordY: %.2f", point.x, point.y);
point = [self convertToNodeSpace: point];
CCLOG(@"CCNode1 coordX: %.2f coordY: %.2f", point.x, point.y);
point = [self convertTouchToNodeSpace: touch];
CCLOG(@"CCNode2 coordX: %.2f coordY: %.2f", point.x, point.y);
point = [[CCDirector sharedDirector] convertToUI:point];
CCLOG(@"UIView coordX: %.2f coordY: %.2f", point.x, point.y);
point = [rectSprite convertTouchToNodeSpaceAR:touch];
CCLOG(@"TouchAR coordX: %.2f coordY: %.2f", point.x, point.y);
return YES; CCNode
}
- (void) ccTouchMoved:(UITouch *)touch withEvent:(UIEvent*)event {
}
- (void) ccTouchEnded:(UITouch *)touch withEvent:(UIEvent*)event {
}
上面的代碼添加了UIView的事件處理。由于屏幕和Cocos2D采用不同的坐標系，所以我們需要進行坐標轉換。 1）首先獲取屏幕坐標
2）將屏幕坐標轉換為OpenGL的坐標
3）將OpenGL的坐標轉換為Cocos2D的坐標。
從運行結果可以看出Node1和Node2打印出的坐標相同。因為Cocos2D給我們寫了covertTouchToNodeSpace方法，可以看看它的源碼：
復制代碼 代碼如下:
- (CGPoint)convertTouchToNodeSpace:(UITouch *)touch
{
CGPoint point = [touch locationInView: [touch view]];
point = [[CCDirector sharedDirector] convertToGL: point];
return [self convertToNodeSpace:point];
}
至于為什么OpenGL和Node1輸出既然相同，為什么還要使用convertToNodeSpace，由于能力有限，希望大牛們能給告訴我答案。
UIView輸出的是將Cocos2D坐標轉換為屏幕即quartz坐標。
4) convertTouchToNodeSpaceAR是將觸摸點轉換為相對于rectSprite的坐標
8、判斷觸摸點是否在制定的精靈上
復制代碼 代碼如下:
- (BOOL) ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event {
CGPoint point = [touch locationInView: [touch view]];
CCLOG(@"Screen coordX: %.2f coordY: %.2f", point.x, point.y);
point = [[CCDirector sharedDirector] convertToGL: point];
CCLOG(@"OpenGL coordX: %.2f coordY: %.2f", point.x, point.y);
point = [self convertToNodeSpace: point];
CCLOG(@"CCNode1 coordX: %.2f coordY: %.2f", point.x, point.y);
point = [self convertTouchToNodeSpace: touch];
CCLOG(@"CCNode2 coordX: %.2f coordY: %.2f", point.x, point.y);
//point = [[CCDirector sharedDirector] convertToUI:point];
//CCLOG(@"UIView coordX: %.2f coordY: %.2f", point.x, point.y);
CCLOG(@"%d", rectSprite.textureRect.size.width);
CGRect rect = [rectSprite textureRect];
rect = CGRectMake(0, 0, rect.size.width, rect.size.height);
CCLOG(@"orgX: %.2f orgY: %.2f width:%.2f height: %.2f",rect.origin.x, rect.origin.y, rect.size.width, rect.size.height);
point = [rectSprite convertTouchToNodeSpaceAR:touch];
CCLOG(@"TouchAR coordX: %.2f coordY: %.2f", point.x, point.y);
if(CGRectContainsPoint(rect, point)) {
CCLOG(@"You touched in the rectSprite");
}
return YES;
}
9、獲取觸摸的是哪個tile，并改變該tile.
復制代碼 代碼如下:
CCSprite *rectSprite;
CCTMXTiledMap *gameWorld;
int speed = 10;
-(id) init
{
// always call "super" init
// Apple recommends to re-assign "self" with the "super" return value
if( (self=[super init])) {
gameWorld = [CCTMXTiledMap tiledMapWithTMXFile:@"PositionText.tmx"];
[self addChild:gameWorld];
CGSize winSize = [[CCDirector sharedDirector] winSize];
CCLOG(@"gameWorld.mapSize.width:%.2f gameWorld.mapSize.height:%.2f",gameWorld.mapSize.width, gameWorld.mapSize.height);
CCLOG(@"gameWorld.tileSize.width: %.2f gameWorld.tileSize.height:%.2f", gameWorld.tileSize.width, gameWorld.tileSize.height);
CCLOG(@"winSize.width:%.2f winSize.height:%.2f", winSize.width, winSize.height);
CCSprite *pointSprite = [CCSprite spriteWithFile:@"point.png"];
[gameWorld addChild:pointSprite z:2 tag:1];
pointSprite.position = ccp(20,20);
pointSprite.anchorPoint = ccp(0.5, 0.5);
rectSprite = [CCSprite spriteWithFile:@"myrect.png"];
[gameWorld addChild:rectSprite z:0 tag: 3];
rectSprite.position = ccp(40, 40);
rectSprite.anchorPoint = ccp(0, 0);
[self setIsTouchEnabled:YES];
}
return self;
}
- (void) registerWithTouchDispatcher {
[[CCTouchDispatcher sharedDispatcher] addTargetedDelegate:self priority:INT_MIN + 1 swallowsTouches:YES];
}
- (BOOL) ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event {
CGPoint point = [touch locationInView: [touch view]];
point = [self convertTouchToNodeSpace: touch];
CCLOG(@"CCNode2 coordX: %.2f coordY: %.2f", point.x, point.y);
CGPoint tilePos = [self tilePosition:point];
if(tilePos.x == -1 || tilePos.y == -1) return NO;
CCTMXLayer *ly = [gameWorld layerNamed:@"Layer 0"];
if([ly tileGIDAt:tilePos] != 3) {
[ly setTileGID:0 at: tilePos];
}
return YES;
}
- (void) ccTouchMoved:(UITouch *)touch withEvent:(UIEvent*)event {
}
- (void) ccTouchEnded:(UITouch *)touch withEvent:(UIEvent*)event {
}
- (CGPoint) tilePosition:(CGPoint)pos {
CGPoint point;
CCTMXLayer *ly = [gameWorld layerNamed:@"Layer 0"];
if(ly== nil) {
CCLOG(@"Error: Layer not found!");
return ccp(-1, -1);
}
CGSize layerSize = [ly layerSize];
CGSize tileSize = [gameWorld tileSize];
int x = pos.x / tileSize.width;
int y = layerSize.height - pos.y / tileSize.height;
if((x >= 0) && (x < layerSize.width) && (y >= 0) && (y < layerSize.height)) {
point = ccp(x, y);
} else {
point = ccp(-1, -1);
}
if(point.x < 0) return ccp(-1, -1);
if(point.y < 0) return ccp(-1, -1);
if(point.x >= layerSize.width) return ccp(-1, -1);
if(point.y >= layerSize.height) return ccp(-1, -1);
CCLOG(@"%d, %d", x, y);
return point;
}
