在 kernel/msm-3.10 / arch/arm64/configs/ze550kl_user_defconfig中

將CONFIG_MSM_DLOAD_MODE=y改成

#CONFIG_MSM_DLOAD_MODE is not set

然后在/ drivers/power/reset/msm-poweroff.c中將

if (!in_panic) {// Normal reboot. Clean the PRintk buffer magicprintk_buffer_slot2_addr = (ulong *)PRINTK_BUFFER_SLOT2;*printk_buffer_slot2_addr = 0;}

改成

#ifdef CONFIG_MSM_DLOAD_MODEif (!in_panic) {// Normal reboot. Clean the printk buffer magicprintk_buffer_slot2_addr = (ulong *)PRINTK_BUFFER_SLOT2;*printk_buffer_slot2_addr = 0;}#endif