05 開機噪聲 (VGA CARD) A. VGA ON BOARD 1. 將ON BOARD VGA Disable,插上外接之PCI VGA CARD測試是否正常,若正常則為ON BOARD VGA之問題 2. 檢查VGA Connector之焊錫面是否OPEN or SHORT 3. 檢查CHIP至VGA Connector之R, G, B,三原色,水平及垂直同步信號之線路及零件是否OPEN or SHORT or零件不良 4. 檢查CHIP至VGA之MEMORY (SDRAM or SGRAM) 的CLK是否正確及相關之線路,零件有無OPEN or SHORT 5. 檢查CHIP至VGA之MEMORY (SDRAM or SGRAM) 的PIN是否OPEN or SHORT 6. 檢查CHIP至VGA之MEMORY (SDRAM or SGRAM) 的線路及相關之零件是否OPEN or SHORT or零件不良 B. VGA CARD (PCI, AGP) 1. 檢查送給VGA CHIP之工作電壓是否正確 2. 檢查送給VGA CHIP之CLK頻率是否正確,相關之線路及零件是否OPEN or SHORT or零件不良 3. 參考A項之2~6點維修 4. 檢查金手指是否OPEN or SHORT本篇文章發表于www.intohard.com中國硬盤基地網